How to Convert PSI to kPa
Convert pounds per square inch to kilopascals for tyres, equipment and engineering documents.
The PSI-to-kPa factor
One pound per square inch equals approximately 6.894757293 kilopascals. Multiply PSI by this factor to obtain kPa. The relationship follows from the international pound-force and inch definitions.
For example, 30 PSI is approximately 206.843 kPa, 32 PSI is approximately 220.632 kPa, and 35 PSI is approximately 241.317 kPa.
Vehicle tyre pressure
Tyre placards and pumps may use different units. Convert the manufacturer's stated pressure rather than relying on a generic recommendation. A conversion tool does not determine the correct pressure for a vehicle.
Where the manufacturer specifies cold tyre pressure, check it before driving or after the vehicle has been stationary for the recommended period. Temperature and use can change the measured pressure.
Gauge and absolute pressure
PSI and kPa can describe gauge, absolute or differential pressure. Unit conversion does not change that reference. A value of 100 kPa gauge and 100 kPa absolute do not describe the same physical condition.
Carry designations such as psig, psia, kPa(g) or kPa(a) into technical documentation. Losing the reference while converting can be more serious than a rounding difference.
Rounding and safety
For a dashboard or handheld gauge, whole kPa or one decimal PSI may be adequate. Engineering work should follow the tolerance and significant figures required by the equipment or standard.
Pressure systems can be hazardous. Confirm equipment ratings, calibration and the governing procedure before applying a converted value.
